HP ProCurve 6120G/XG Configuration Manual page 372

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
N o t e
The retries and timeout values are not used to send trap requests.
To verify the configuration of SNMPv2c informs, enter the show snmp-server
command:
ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
...
Address
--------------------- --------------- ----------- ----------- ----- --------
15.28.333.456
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Selection Policy
Ip Address
Figure 13-8. Display of SNMPv2c Inform Configuration
13-24
MIB View Write Access
Manager Unrestricted
Community
guest
: Default rfc1517
: Configured IP
: 10.10.10.10
Events Sent Notify Type Retry Timeout
All inform
SNMPv2c Inform
configuration
3 15