Getting Started
Introduction
Introduction
This guide is intended for use with the HP ProCurve 6120G/XG and 6120XG
switches.
It describes how to use the command line interface (CLI), Menu interface, and
web browser to configure, manage, monitor, and troubleshoot switch opera
tion. For an overview of product documentation for the above switches, refer
to "Product Documentation" on page xiii. You can download documentation
from the following web sites:
Conventions
This guide uses the following conventions for commands and screen displays.
Command Syntax Statements
Syntax: ip < default-gateway < ip-addr >> | routing >
Syntax: show interfaces [port-list ]
■
■
■
■
■
■
1-2
www.procurve.com/manuals
www.hp.com/go/bladesystem/documentation
h18004.www1.hp.com/products/blades/components/c-class-tech-installing.html
Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
Braces ( < > ) enclose required elements.
Braces within square brackets ( [ < > ] ) indicate a required element within
an optional choice.
Boldface indicates use of a CLI command, part of a CLI command syntax,
or other displayed element in general text. For example:
"Use the copy tftp command to download the key from a TFTP server."
Italics indicate variables for which you must supply a value when execut
ing the command. For example, in this command syntax, you must provide
one or more port numbers:
Syntax: aaa port-access authenticator < port-list >