Customizing The Show Interfaces Command - HP ProCurve 6120G/XG Configuration Manual

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Syntax: show interfaces display
For example:
Dynamically updates
Figure 10-5. Example of show interfaces display Command with Dynamically Updating Output

Customizing the Show Interfaces Command

You can create show commands displaying the information that you want to
see in any order you want by using the custom option.
10-10
Initiates the dynamic update of a command. The output is the
same as the equivalent "show" command.The information is
updated every 3 seconds.
Note: Select "Back" to exit the display.
ProCurve# show interfaces display