Tftp: Copying A Configuration File To A Remote Host - HP ProCurve 6120G/XG Configuration Manual

Procurve series 6120 blade switches management and configuration guide
Hide thumbs Also See for ProCurve 6120G/XG:
Table of Contents

Advertisement

Switch Memory and Configuration
Multiple Configuration Files
copy config < src-file > xmodem < pc | unix > [oobm]
copy xmodem config < dest-file > < pc | unix > [oobm]

TFTP: Copying a Configuration File to a Remote Host

Syntax:
For example, the following command copies a startup-config file named test­
01 from the switch to a (UNIX) TFTP server at IP address 10.10.28.14:
ProCurve(config)# copy config test-01 tftp 10.10.28.14
test-01.txt unix
6-38
copy config < src-file > tftp < ip-addr > < remote-file > < pc | unix > [oobm]
This is an addition to the copy tftp command options. Use
this command to upload a configuration file from the switch
to a TFTP server.
The oobm parameter specifies that the copy operation will go
out from the out-of-band management interface. If this
parameter is not specified, the copy operation goes out from
the data interface. Refer to Appendix G, "Network Out-of-
Band Management" in this guide for more information on
out-of-band management.
For more on using TFTP to copy a file to a remote server, refer
to "TFTP: Copying a Configuration File to a Remote Host" on
page A-26.
6-40
6-40

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6120xgProcurve 6120 series

Table of Contents