HP ProCurve 6120G/XG Manual page 518

Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Syntax:
ProCurve (config)# show port-access authenticator clients 5 detailed
Port Access Authenticator Client Status Detailed
Client Base Details :
Port
Session Status : Open
Frames In
Username
IP
Access Policy Details :
COS Map
Untagged VLAN
Tagged VLANs
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 12-17. Example of show port-access authenticator clients detailed Command Output
12-62
show port-access authenticator clients <port-list> detailed
Displays detailed information on the status of 802.1X­
authenticated client sessions on specified ports.
: 5
: 999999999
: webuser1
: 2001:fecd:ba23:cd1f:dcb1:1010:9234:4088
: 70000000
: 3096
: 1, 3, 5, 6, 334, 2066
Session Time(sec) : 999999999
Frames Out
MAC Address
In Limit %
Out Limit %
: 99999999
: 001321-eb8063
: 87
: 100