HP ProCurve 6120G/XG Manual page 516

Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
ProCurve(config)# show port-access authenticator vlan
Figure 12-15.Example of show port-access authenticator vlan Command
12-60
Syntax: show port-access authenticator vlan [port-list]
Displays the following information on the VLANs configured
for use in 802.1X port-access authentication on all switch
ports, or specified ports, that are enabled as 802.1X authen­
ticator:
• Authentication mode used on each port, configured with
the aaa port-access authenticator control command (see page
12-22)
• VLAN ID (if any) to be used for traffic from 802.1X­
authenticated clients
• VLAN ID (if any) to be used for traffic from
unauthenticated clients
802.1X configuration information for ports that are not
enabled as an 802.1X authenticators is not displayed.
Port Access Authenticator VLAN Configuration
Port-access authenticator activated [No] : Yes
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Access Unauth
Port Control VLAN ID
---- -------- -------- --------
2 Auto 0
Auth
VLAN ID
0