Configuring Advanced Threat Protection
Using the Instrumentation Monitor
To enable instrumentation monitor using the default parameters and thresh
olds, enter the general instrumentation monitor command. To adjust specific
settings, enter the name of the parameter that you wish to modify, and revise
the threshold limits as needed.
Examples
To turn on monitoring and event log messaging with the default medium
values:
To turn off monitoring of the system delay parameter:
To adjust the alert threshold for the MAC address count to the low value:
To adjust the alert threshold for the MAC address count to a specific value:
To enable monitoring of learn discards with the default medium threshold
value:
To disable monitoring of learn discards:
To enable or disable SNMP trap generation:
10-36
ProCurve(config)# instrumentation monitor
ProCurve(config)# no instrumentation monitor system-
delay
ProCurve(config)# instrumentation monitor mac-
address-count low
ProCurve(config)# instrumentation monitor mac-
address-count 767
ProCurve(config)# instrumentation monitor learn-
discards
ProCurve(config)# no instrumentation monitor learn-
discards
ProCurve(config)# [no] instrumentation monitor trap