Displaying Arp Packet Statistics - HP ProCurve 6120G/XG Manual

Configuring Advanced Threat Protection
Dynamic ARP Protection
Figure 10-1. The show arp-protect Command

Displaying ARP Packet Statistics

To display statistics about forwarded ARP packets, dropped ARP packets,
MAC validation failure, and IP validation failures, enter the show arp-protect
statistics command:
ProCurve(config)# show arp-protect statistics
Status and Counters - ARP Protection Counters for VLAN 1
Forwarded pkts
Bad bindings
Malformed
Status and Counters - ARP Protection Counters for VLAN 2
Forwarded pkts
Bad bindings
Malformed
Figure 10-2. Show arp-protect statistics Command
10-22
ProCurve(config)# show arp-protect
ARP Protection Information
Enabled Vlans : 1-4094
Validate : dst-mac, src-mac
Port Trust
----- -----
B1 Yes
B2 Yes
B3 No
B4 No
B5 No
: 10
: 1
pkts : 0
: 1
: 1
pkts : 1
Bad source mac
Bad destination mac: 1
Bad IP address
Bad source mac
Bad destination mac: 1
Bad IP address
: 2
: 0
: 1
: 1