HP ProCurve 6120G/XG Manual page 194

RADIUS Authentication, Authorization, and Accounting
Configuring the Switch for RADIUS Authentication
■
■
■
■
■
■
Syntax: aaa authentication num-attempts < 1 - 10 >
5-18
Number of login attempts: In a given session, specifies how many
tries at entering the correct username and password pair are allowed
before access is denied and the session terminated. (This is a general
aaa authentication parameter and is not specific to RADIUS.)
Global server key: The server key the switch will use for contacts
with all RADIUS servers for which there is not a server-specific key
configured by radius-server host < ip-address > key < key-string >. This
key is optional if you configure a server-specific key for each RADIUS
server entered in the switch. (Refer to "3. Configure the Switch To
Access a RADIUS Server" on page 5-14.)
Server timeout: Defines the time period in seconds for authentica­
tion attempts. If the timeout period expires before a response is
received, the attempt fails.
Server dead time: Specifies the time in minutes during which the
switch avoids requesting authentication from a server that has not
responded to previous requests.
Retransmit attempts: If the first attempt to contact a RADIUS
server fails, specifies how many retries you want the switch to attempt
on that server.
Change of Authorization port: The dyn-autz-port parameter
specifies the UDP port number that listens for the Change of Autho­
rization and Disconnect messages. The UDP port range is 1024-49151.
The default port is 3799.
Specifies how many tries for entering the correct user-
name and password before shutting down the session
due to input errors. (Default: 3; Range: 1 - 10).
[no] radius-server
key < global-key-string >
Specifies the global encryption key the switch uses with
servers for which the switch does not have a server-
specific key assignment. This key is optional if all
RADIUS server addresses configured in the switch
include a server-specific encryption key. (Default:
Null.)