HP ProCurve 6120G/XG Manual page 113

ProCurve (config)# show port-access web-based
Port Access Web-Based Status
Auth Unauth
Port Clients Clients
----- -------- -------- -------- ------
1 1 1
2 2 0
3 4 0
Figure 3-8.Example of show port-access web-based Command Output
Syntax:
ProCurve (config)# show port-access web-based clients
Port Access Web-Based Client Status
Port Client Name
----- ------------ -------------
1 webuser1
1 webuser2
1 webuser3
3 webuser4
Figure 3-9. Example of show port-access web-based clients Command Output
Untagged Tagged
VLAN VLANs
4006 Yes
MACbased No
1 Yes
show port-access web-based clients [port-list]
Displays the session status, name, and address for each web-
authenticated client on the switch. The IP address displayed
is taken from the DHCP binding table (learned through the
DHCP Snooping feature).
If DHCP snooping is not enabled on the switch, n/a (not
available) is displayed for a client's IP address.
If a web-authenticated client uses an IPv6 address, n/a - IPv6
is displayed.
If DHCP snooping is enabled but no MAC-to-IP address
binding for a client is found in the DHCP binding table, n/a
- no info is displayed.
MAC Address IP Address
--------------- -------------
0010b5-891a9e 192.192.192.192 Authenticated
001560-b3ea48 n/a - no info
000000-111111 n/a - IPv6
000000-111112 n/a
Web and MAC Authentication
Configuring Web Authentication
Port Cntrl
COS Dir
-------- ------
70000000
Yes
No
Session Status
Authenticating
Authenticating
Authenticating
3-29