Final Installation; Performance Checklist - Viking FDBB5362R Installation Manual

Final Installation

28
Replace top air grille.
30
Replace the center grille louver.
32
Press "ACTIVATE CONTROLS"
pad and close door.
Note: There is a 6 minute delay before the unit starts.
46
29
Using an 8" magnetic nut driver,
replace the two 1/4" screws.
31
Open door. The display should flash.

Performance Checklist

□ Verify cabinet size.
□ Verify electrical supply and water supply
(if applicable).
□ Install anti-tip device(s) and verify unit is
secure.
□ Position unit in cutout, level at desired
height and secure unit.
□ Plug-in unit and verify operation.
□ Connect water supply (if applicable).
• Verify icemaker fill tube is properly
inserted.
• Verify icemaker bail arm is down.
• Verify dispenser operation
(if applicable).
47
□ Align/square door(s).
□ Verify drain pan is properly installed and
there are no leaks on water connection.
□ Install kickplate.
□ Remove internal packaging and labels
and wipe unit down.
Installer's information:
Installer's name:
_____________________________
Installer's company: _________________________
Date: ________________________________________