Names And Functions Of Parts - Toshiba Estia HWS-802XWHM3-E Owner's Manual

Hydro Unit
2

NAMES AND FUNCTIONS OF PARTS

Buttons
▼ Fig. 2-01
1
10
2
3
4
1. TEMP. button: Changes the set temperature for
each operation mode (ZONE1/2 hot
water) by 1°C step.
2. SCHEDULE button: Sets the current time and scheduled
weekly operation.
Changes time for current time setting
3. TIME button:
and scheduled weekly operation
setting with
4. SET button: Determines the entered current time
setting and scheduled weekly
operation setting.
5. CL button:
Clears settings for the current time
and scheduled weekly operation.
Sets days of the week for current
6. DAY button:
time setting and scheduled weekly
operation setting.
7. STEP button:
Specifies switching STEP number in
a day for weekly schedule.
8. TEST button:
Used for test run or service.
9. FROST
Controls minimum operation for
PROTECTION button:
unused period (going out, absence,
etc.) for anti freezing.
NOTE
Some functions are not provided depending on the system specifications in use.
For details, contact the installation company.
6 7
5 8 9 11
10. NIGHT button:
11. AUTO TEMP.
button:
12. OPERATE MODE
button:
and buttons.
13. ZONE1, 2 button:
14. ANTI BACTERIA
button:
15. HOT WATER
BOOST button:
16. HOT WATER
button:
17. SELECT button:
– 5 –
17
16
15
14
12
13
Controls the night set back
operation.
Switches setting temperature
automatically according to outside
temperature. (Pressing this button
long changes the mode to data
setting mode.)
Selects ZONE1/2 operation mode
(heating or cooling).
Turns on/off the zone (floor heating/
radiator/Fan Coil Unit) operation.
Regularly increases the hot water
temperature in the tank for
sterilization. (Pressing this button
long changes the mode to data
setting mode.)
Boosts boiling when high tapping
temperature is required temporarily.
Turns on/off hot water operation.
Selects an operation mode when
changing the set temperature of
each operation mode.
Owner's Manual
EN
4-EN