Toshiba Estia HWS-802XWHM3-E Owner's Manual page 6

Hydro unit air to water heat pump
Hide thumbs Also See for Estia HWS-802XWHM3-E:
Table of Contents

Advertisement

Available languages

Available languages

Hydro Unit
Meaning of Indication
▼ Fig. 2-02
18. Indication
The [
] mark lights for operation mode for which temperature is to be changed.
°C
5-EN
18
19
Heating side [ZONE1, 2]
Description
Lights when floor heater or radiator is
connected (when the system has floor
heater or radiator).
Lights when controlling the second
temperature.
(It may not light depending on the
system)
Lights during heating or cooling
operation using the heat pump.
Lights when the internal heater is
energized during heating operation.
Lights when heating is selected.
Lights when cooling is selected.
Lights when the FROST
PROTECTION button is pressed and
goes out when the button is pressed
again.
Lights when Auto operation is
selected.
Displays heating/cooling set
temperature.
(Heating: 20 to 55°C, factory setting:
Auto, cooling: 10 to 30°C)
Goes out when Auto operation is
selected.
Lights when the set temperature or sensor's water temperature is displayed with the 7-segment
indicator.
20. Indication
– 6 –
Owner's Manual
20
21
Hot water side
Description
Lights when hot water supply system
is connected (when the system has
hot water supply).
Lights when hot water supply
operation is performed by heat pump.
Lights when the internal heater is
energized during hot water supply
operation.
Lights during hot water supply
operation.
Lights while hot water boost is
activated.
Lights when the ANTI BACTERIA
button is pressed and goes out when
the button is pressed again.
Displays hot water set temperature.
(40 to 75°C, factory setting: 65°C)

Advertisement

Table of Contents
loading

Table of Contents