Special Features; Replacement Bulbs; Maintenance - GE 106658 Instruction Manual

SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
1. Your lighted makeup mirror will
adjust to 15 different angles. Simply tilt
the mirror housing back and place the
metal brace in the desired slot on the bar.
2. Take the plug and insert into any
standard wall outlet (120 Volt AC).
3. Now determine the appropriate light
setting for applying your makeup. Turn
the indicator knob to the setting. This
lighted mirror produces intimate light-
ing for shadow-free makeup applica-
tions. Choose either the regular or mag-
nified mirror for viewing.
4. After use, turn dial to "OFF" position,
unplug and store mirror in a safe
location.

SPECIAL FEATURES

This lighted makeup mirror uses incan-
descent light bulbs with special coating,
reproducing shadow-free lighting in
three different settings: home, office
and day.
This mirror has a courtesy outlet for
styling appliances, 12 amp max.

REPLACEMENT BULBS

Replacing the bulbs in your GE Lighted
Mirror is easy. Call 1-877-207-0923 for
instructions on ordering replacement
light bulbs. Then simply follow the
instructions below.
1. Unplug your Lighted Mirror.
2. Open the doors and look for the
thumb indentation in the middle of
each lens (the cover over the light bulbs).
3. With a coin or the tip of a screwdriver,
carefully lift up the lens.
4. Reach in and unscrew the used light
bulb and replace it with a light bulb of
the same color (blue bulbs on top, white
bulbs on the bottom).
5. Slide the lens back into position and
snap it closed (the snaps are located
on top and bottom of the lens).
6. Now you can plug your mirror back
in. It is ready for use.

MAINTENANCE

Your lighted mirror is designed for
household use, and is virtually mainte-
nance-free. No lubrication is needed. If
cleaning becomes necessary, disconnect
the appliance from the power source
and wipe exterior with a damp cloth.
Clean mirror surfaces with a glass clean-
er. If any abnormal condition occurs,
unplug the lighted mirror, allow it to
cool, and return it to the place of pur-
chase for exchange.