Handling - Canon iR4570 User Manual

Do not use power cords other than the power cord provided, as this may result in a fire or
electrical shock.
As a general rule, do not use extension cords. Using an extension cord may result in a fire or
electrical shock. If an extension cord must be used, however, use one rated for voltages of
220-240 V AC, 50/60 Hz and over, untie the cord binding, and insert the power plug completely
into the extension cord outlet to ensure a firm connection between the power cord and the
extension cord.
CAUTION
Do not use power supplies with voltages other than those specified herein, as this may result
in a fire or electrical shock.
Always grasp the power plug when disconnecting the power cord. Pulling on the power cord
may expose or snap the core wire, or otherwise damage the power cord. If the power cord is
damaged, this could cause current to leak, resulting in a fire or electrical shock.
Leave sufficient space around the power plug so that it can be unplugged easily. If objects are
placed around the power plug, you will be unable to unplug it in an emergency.

Handling

WARNING
Do not attempt to disassemble or modify the machine. There are high-temperature and
high-voltage components inside the machine which may result in a fire or electrical shock.
If the machine makes strange noises, or gives off smoke, heat, or strange smells,
immediately turn OFF the main power switch, and disconnect the power cord from the power
outlet. Then, contact your local authorized Canon dealer. Continued use of the machine in
this condition may result in a fire or electrical shock.
Do not use highly flammable sprays near the machine. If gas from these sprays comes into
contact with the electrical components inside the machine, it may result in a fire or electrical
shock.
To avoid damage to the power cord and creating a fire hazard, always turn OFF the main
power switch, and unplug the interface cable when moving the machine. Otherwise, the
power cord or interface cable may be damaged, resulting in a fire or electrical shock.
Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill
water, liquids, or flammable substances (alcohol, benzene, paint thinner, etc.) inside the
machine. If these items come into contact with a high-voltage area inside the machine, it may
result in a fire or electrical shock. If these items are dropped or spilled inside the machine,
immediately turn OFF the main power switch, and disconnect the power cord from the power
outlet. Then, contact your local authorized Canon dealer.
xv