Advertisement
MW
650 |
MW
800
User Manual
Contents
Safety
Features
Before Installation
Installation
Installation/Wiring
Painting
Specifi cations
User Manual
MW Series
High-Performance In-Wall Speakers
Safety Precautions
Quest Engineering strongly
advise unless you possess skill
P.03
in the proper use of hand and
power tools and have a thorough
understanding of local building
P.04
and fi re codes, then the installation
of this speaker should be carried
out by suitably qualifi ed personnel
following locally authorised and
P.05
approved safety standards. A
familiarity with the area behind the
wall or ceiling where you plan to
P.06
install the speakers is extremely
important. Improper installation
can cause serious injury or
death. If in doubt contact your
P.07
Quest Engineering dealer or a
professional installation technician.
P.10
P.11
Attention
Before connecting or operating your new
Quest Engineering speaker, please study the
accompanying instruction manual paying
particular attention to the operating precautions
and wiring procedure.
Quest Engineering will not assume
responsibility for incorrect installation or
operation of this product.
MW
650 |
MW
800
User Manual
Do not attempt to clean the
plastic enclosure with solvents or
petrochemical based cleaners.
Installation allowing direct
precipitation is not advised and
installation practise must prevent
liquids from entering the speaker
enclosure.
Do not place sources of heat
on the speaker cabinet such as
lighting equipment or smoke
machines, and where possible
please keep out of direct sunlight.
Register Your Product
Thank you for choosing Quest. Please take
the time to complete your product registration
card which is included with the packaging.
Registering your Quest Engineering product will:
• CONFIRM YOUR WARRANTY
• REGISTER YOUR PRODUCT
• PROTECT YOUR NEW PRODUCT
REGISTER ONLINE:
www.questaudio.net/registration
MW Series
User Manual
High-Performance In-Wall Speakers
3
Advertisement
