GE Disposall GFB760 Series Owner's Manual page 6

2
DISHWASHER CONNECTION (IF REQUIRED)
If you are connecting to a dishwasher, complete the
following step. If a dishwasher is not to be connected,
go on to "Attaching the Discharge Elbow" section.
KNOCK OUT PLUG
1
Using a blunt instrument (steel punch or wooden
dowel), knock out entire plug. Do not use a
screwdriver or sharp instrument. When knockout
plug falls into disposer, you may remove it or
simply grind it up when the disposer is used. This
will not damage the disposer in any way, but may
take some time to grind, over the course of several
uses.
3
ATTACHING THE DISCHARGE ELBOW
CONNECT DISCHARGE ELBOW
Connect the discharge elbow to the disposer.* Make
sure all plumbing connections are tight.
Rubber
Gasket
Discharge
Elbow
6
Installation Instructions
Knock out
plug
CONNECT HOSE
2
Connect the dishwasher hose using a hose clamp.
If the hose size is different, you will need a
stepped rubber adapter.
Hose Clamp
* Some installations (see page 8 for examples) may
require the use of a flexible drain pipe.
Stepped Rubber Adapter