HP Phoneline Gateway hn200p User Manual page 39

4 Enter the port number for the application; if a range is specified, click the Enter
Port Range checkbox and enter the range of port numbers in the Starting Port
and Ending Port fields.
5 To specify the protocol, click Advanced and select among these choices:
Both TCP and UDP (the default)
❑
TCP
❑
UDP
❑
6 Click OK.
7 Click Apply to save the changes.
To remove an application from the list:
1 On the Application Hosting tab, click Remove Application(s).
2 Click the checkbox next the application you wish to remove. You can check
more than one box.
3 Click OK.
4 Click Apply to save the changes.
Expert Interface tab
This tab provides access to the Expert Interface described in the Appendix to this
user's guide. The other tabs of the Gateway Control Panel to provide automated
access to the Expert Interface settings. Only advanced users should attempt to
access the Expert Interface directly.
To access the Expert Interface, click Launch Expert Interface.
Caution:
Only one user can access the Expert Interface at a time.
FAQ & Troubleshooting tab
This tab refers you to this user's guide, which resides on the CD-ROM provided. You
may want to refer to the following chapters:
Appendix: the Expert Interface
❑
Troubleshooting
❑
FAQ
❑
Glossary
❑
gateway control panel tabs
39