NOTE: The LaCie box is uniquely produced to accommodate SATA 3.5” hard disk drives. No other drives save for SATA 3.5” hard disk drives are compatible with the LaCie box. Please note that, due to the numerous manufacturers of SATA 3.5” hard disk drives, LaCie cannot guarantee that every model will work with the LaCie box.
NOTE: The LaCie box is uniquely produced to accommodate SATA 3.5” hard disk drives. No other drives save for SATA 3.5” hard disk drives are compatible with the LaCie box. Please note that, due to the numerous manufacturers of SATA 3.5” hard disk drives, LaCie cannot guarantee that every model will work with the LaCie box.
Setup Steps I) Install an internal hard disk drive. 1. Make certain the power and USB 2.0 cables are disconnected from the LaCie box. 2. Turn the box over so that the rubber feet are pointing up. Please note the two plastic bands for prying the bottom plate from the top shell.
Page 6
LaCie is not responsible for any damage or loss of drive performance caused by separating the top and bottom of the box in such a manner.
Page 24
LaCie Australia support.intl@lacie.com 458 Gardeners Rd. LaCie Middle East Alexandria, NSW 2015 Visit www.lacie.com for more LIU-E6, PO Box 293860, info.au@lacie.com information on LaCie products. Dubai Airport Free Zone, Dubai, U.A.E. LaCie Benelux info.me@lacie.com Vorstlaan 165/ Bld du Souverain 165...
Need help?
Do you have a question about the Box and is the answer not in the manual?
Questions and answers