Before You Begin
Set up of the printer must be complete before you begin to set up the
scanner.
Selecting a Location
The scanner must be located on a flat, stable surface near the printer. This
can be a table or desk, or it can be the optional ScanCenter Stand. Whatever
the location, be sure it is cleared and ready before you begin to unpack the
scanner.
CAUTION
The printer is not designed to support the scanner. Do not
attempt to set up the scanner on top of the printer.
NOTE
If you are using the optional ScanCenter Stand, you will need to
assemble it first. Assembly instructions are included with the
ScanCenter Stand.
Unpacking and Setup
!
:
Chapter 1
Unpacking and Setup
1-1