Download  Print this page

System Contents; System Overview - Philips REMstar Pro User Manual

Hide thumbs


System Contents

Your REMstar Pro C-Flex+ system includes the following items:
• Device
• User manual
• Carrying case
• Power cord and power supply (Part # 1058190)
• Flexible tubing, 22 mm (optional 15 mm tubing is also available)
note: If any of these items are missing, contact your home care provider.

System overview

The REMstar Pro C-Flex+ is a CPAP (Continuous Positive Airway Pressure) device designed for the treatment of
Obstructive Sleep Apnea (OSA). CPAP maintains a constant level of pressure throughout the breathing cycle.
When prescribed for you, the device provides several special features to help make your therapy more comfortable.
The ramp function allows you to lower the pressure when you are trying to fall asleep. The air pressure will gradually
increase until your prescription pressure is reached. You also have the option of not using the ramp feature at all.
Additionally, the C-Flex and C-Flex+ comfort features provide you with pressure relief when you exhale during
Several accessories are also available for use with your REMstar Pro device. Contact your home care provider to
purchase any accessories not included with your system.
This figure illustrates some of the device features, described in the following table.
Air Outlet Port
(conical, 22 mm)
SD Card (Accessory) Slot
SD Card Cover
Power Inlet
Filter Area
Side Cover
Air Outlet Port
Connect the flexible tubing here.
If applicable, insert the optional accessory SD card here.
If applicable, the optional accessories such as a Link Module or Modem can be installed here.
Refer to the instructions supplied with the accessory. When not using an accessory, this
cover must be in place on the device.
Connect the power cord here.
A reusable, gray foam filter must be placed in the filter area to screen out normal household
dust and pollens. A white ultra-fine filter can also be used for more complete filtration of very
fine particles.
If using a humidifier with the device, this side cover can be easily removed with the release
tab before attaching the humidifier. Refer to the humidifier manual. When not using a
humidifier, this cover must be in place on the device.
• Reusable gray foam filter
• Disposable ultra-fine filter (optional)
• Side cover panel
• SD card
• Humidifier (optional)
Side Cover
SD Card (Accessory) Slot
SD Card Cover
Power Inlet
Filter Area
User Manual


Table of Contents

   Also See for Philips REMstar Pro

This manual is also suitable for:

Respironics remstar pro c-flex +

Comments to this Manuals

Symbols: 0
Latest comments: