Download  Print this page

Advertisement

info Screen

From the Home screen, highlight "Info" and press the wheel. The following Info screen will appear. The user cannot
change settings in the Info menu.
note: These screens are only for reference. Your home care provider may periodically ask you for this information.
Compliance VIC
Days > 4
Large leak
info Screen
note: The screen will only show 4 lines at a time. As you rotate the wheel to toggle over different options the
screen will slide up and down accordingly.
• Status - This displays information sent from a peripheral (SD card
attached, two lines will appear with corresponding icons.
note: This will not display if no peripherals are being used.
• Phone-in - This screen displays the total therapy hours for the device, the total blower hours, and the total number of
days used when the sessions were greater than 4 hours since the device was last reset by the home care provider. This
screen also displays a compliance check number used by your home care provider to validate that the data provided
by you is the data taken from this screen. This setting only appears if your provider has enabled this feature.
• Compliance VIC (Visual Inspection Check) - This screen displays the start day and the total number of days
used when the sessions were greater than 4 hours. This screen also displays a check code number used by your
home care provider to validate that the data provided by you is the data taken from this screen. This setting only
appears if your provider has enabled this feature.
• Therapy hours - The device is capable of recognizing the difference between the time the patient is actually
receiving therapy and the time when the blower is simply running. This screen displays the average amount of time
the patient is actually receiving therapy on the device over a 7 day and 30 day time frame (provided the device has
at least 7 or 30 days of data respectively). If the device has only 5 days of data to use for the calculation, the 5 day
average value will be seen under the 7 day display.
• Days > 4 - This screen displays the cumulative number of device therapy sessions that exceeded 4 hours over a 7
day and 30 day time frame.
• Large leak - During any given night, the device recognizes the percentage of time the patient was experiencing
what it deemed to be a large leak. Large leak is defined as the level of leak that is so large, it is no longer possible
to determine respiratory events with statistical accuracy. This screen displays the average of these individual nightly
values of percentage of time in large leak over a 7 day and 30 day time frame (provided the device has at least 7 or 30
days of data respectively). If the device has only 5 days of data to use for the calculation, the 5 day average value will be
seen under the 7 day display. If you see a large increase in the percent of time in large leak indicated here, contact your
home care provider for assistance. This screen only displays if your home care provider has enabled it.
• AHI - The device accumulates individual Apnea/Hypopnea indices (AHI) for each session the patient used the
device. This screen displays the average of these individual nightly AHI values over a 7 day and 30 day time frame
(provided the device has at least 7 or 30 days of data respectively). If the device has only 5 days of data to use for
the calculation, the 5 day average value will be seen under the 7 day display. This screen only displays if your home
care provider has enabled it.
• Periodic Breathing - During any given night, the device recognizes the percentage of time the patient was
experiencing periodic breathing. This screen displays the average of these individual nightly values of periodic
breathing over a 7 day and 30 day time frame (provided the device has at least 7 or 30 days of data respectively). If
the device has only 5 days of data to use for the calculation, the 5 day average value will be seen under the 7 day
display. If you see a large increase in the percent of time in periodic breathing indicated here, contact your home
care provider for assistance. This screen only displays if your home care provider has enabled it.
10
, modem
, etc.). If two peripherals are
User Manual

Advertisement

Table of Contents

   Also See for Philips REMstar Pro

This manual is also suitable for:

Respironics remstar pro c-flex +

Comments to this Manuals

Symbols: 0
Latest comments: