Turning On The Power - Toshiba Satellite U920t Series User Manual

Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
2.
3.

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
section for more information.
User's Manual
Figure 2-5 Connecting the power cord to the AC adaptor (2-pin plug)
Figure 2-6 Connecting the power cord to the AC adaptor (3-pin plug)
Connect the AC adaptor's DC output plug to the DC IN 19V jack on
the back of the computer.
Figure 2-7 Connecting the DC output plug to the computer
1. DC IN 19V jack
Plug the power cord into a live wall outlet - the DC IN/Battery indicator
on the front of the computer should glow.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
Satellite U920t series
2
1
2. DC output plug
Monitoring of power condition
2-7