Replacing The Mouse; Completing The Parts Replacement - Lenovo 10B0 Maintenance Manual

Machine types: 10b0, 10b1, 10b2, 10b3, 10b4, 10b5, 10b6, 10b7, 10ax, and 10ay
Hide thumbs Also See for 10B0:
Table of Contents

Advertisement

2. Connect a new keyboard to the appropriate connector on the computer. Your keyboard might be
connected to a PS/2 keyboard connector
to connect the new keyboard, see "Locating connectors, controls, and indicators on the front of your
computer" on page 69 or "Locating connectors on the rear of your computer" on page 70.
Figure 65. Keyboard connectors

Replacing the mouse

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page 1.
This section provides instructions on how to replace the mouse.
To replace the mouse, do the following:
1. Disconnect the old mouse cable from the computer.
2. Connect a new mouse to the appropriate connector on the computer. Your mouse might be connected
to a PS/2 mouse connector
new mouse, see "Locating connectors, controls, and indicators on the front of your computer" on page
69 or "Locating connectors on the rear of your computer" on page 70.
Figure 66. Mouse connectors

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the computer cover
and reconnect cables.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1
or a USB connector
1
or a USB connector
2
.
Chapter 9
Replacing FRUs (machine types: 10B0, 10B1, 10B2, and 10B3)
2
. Depending on where you want
. Depending on where you want to connect the
131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents