Sending a Fax
Load the document(s) face up with top edge in first into the DADF (Duplex Automatic
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".
Press Fax from the home screen.
3 Press the Direct Input or Address (
If necessary, adjust the document darkness and resolution to suit your fax needs. See
"Adjusting the Document Darkness" or "Adjusting the Document Quality"
Enter the remote fax phone number using the pop-up keyboard.
Press Start ( ) from the screen.
When the document is loaded from the document glass, the display shows Another
Page? on the screen after the document is scanned into the memory. If you have
additional pages, remove the scanned page and load the next page from the glass and
select Yes. Repeat as necessary.
After all of the pages are scanned, select No when the display shows Another Page?
8 it dials the number then sends the fax when the printer establishes contact with the
) from the screen.
to cancel the fax job at any time while sending the fax.