Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Unplug all power cords from electrical outlets.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Push the stand lock upward to unlock it and then slide the stand out as show.
To reinstall the computer stand:
Line up the computer stand with the mounting slots in the chassis and slide it back into
Lift up the rear of the computer stand until you hear a "pa" sound indicating the stand has
Replacing a memory module
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
1 2 3