the SP-300 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the SP-300 MIDI IN connector to the MIDI OUT connector of the computer.
Standard MIDI settings
When turning the instrument on, the MIDI parameters of the SP-300 are pro-
grammed as follows:
Selecting the transmission channel
The standard MIDI has 16 separate channels available for transmission and recep-
tion of data. SP-300 always receives on all 16 channels, and transmits on a single
channel. To transmit data from the SP-300, you need to choose which of the 16
channels you wish to transmit data on.
Hold down the TRANSPOSE/FUNCTION button, and press the note in the range
C2–D#3 corresponding to the desired MIDI channel.
SP-300 rear panel
All 16 (1-16)
MIDI sound module