Selecting the time signature.
While the metronome is working, keep the METRONOME button pressed and
press the button that corresponds to the time signature you wish to use (see table
above). The ﬁrst movement of the measure will be accented.
To deactivate the accent, keep the METRONOME button pressed and press the
sound selection button whose LED is lit.
Note: When the instrument is turned on, the accent is automatically disabled.
Selecting a bell for the accent.
While the metronome is playing, hold down the METRONOME button, then press
the VIBES/GUITAR sound selection button. The LED on the button will light, and a
bell sound will be heard on the ﬁrst beat of the bar.
To return to the normal accent, hold down the METRONOME button and press the
HARPSI/CLAV sound selection button to switch on the LED on the HARPSI/
Note: When the instrument is turned on, the bell is automatically disabled.
You can add an accent to the ﬁrst beat of a mea-
2 movements (2/4, 2/8...)
3 movements (3/4, 3/8...)
4 movements (4/4, 4/8...)
6 movements (6/4, 6/8...)
The accented beat can be changed to a bell