Display Controller And Video Mode; Display Controller; Video Mode - Toshiba DX1210 series User Manual

Display Controller and Video mode

Display controller

The display controller interprets software commands into hardware
commands that turn particular parts on the screen on or off.
Due to the display panel's increased resolution, lines may appear broken in
when displaying images in full-screen text mode.
The display controller also controls the video mode and uses industry
standard rules to govern the screen resolution and the maximum number of
colors that can be displayed at any one time. Therefore, software written for
a given video mode will run on any computer that supports that mode.

Video mode

Video mode settings are configured via the Screen Resolution dialog.
To open the Screen Resolution dialog, click Start → Control Panel →
Appearance and Personalization → Display → Change display
settings.
If you are running some applications (for example a 3D application or video
playback and so on), you may see some disturbance, flickering or frame
dropping on your screen.
If that occurs, adjust the resolution of display, lowering it until the screen is
displayed properly.
Disabling Windows Aero
User's Manual
Appendix B
may also help correct this issue.
TM
B-1