3 WHT BAL(White Balance)
The WHT BAL has three modes; AWB, ATW, MANUAL.
Move the "
" to MODE, push the [DATA UP], [DATA DOWN], and select one of the three modes :
AWB, ATW, MANUAL.
3 1 Changing the setting in AWB(Automatic White Balance) mode
Move up and down
by pushing
MENU UP,DOWN
-- 3 WHT BAL -- <FILE A>
MODE
R PAINT
B PAINT
C TEMP
AREA
AREA DISPLAY
(a) Changing color temperature setting
Move the " " to C.TEMP by pushing [MENU UP], [MENU DOWN] buttons.
Select either 3200K or 5600K by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing R PAINT
Move the " " to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
Red is decreased.
(c) Changing B PAINT
Move the " " to B PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of blue paint by pushing [DATA UP], [DATA DOWN] buttons.
Blue is decreased.
(d) Changing the contents of the zone area selected by AWB
Move the " " to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired area by pushing [DATA UP], [DATA DOWN] buttons.
Select the desired
value by pushing
DATA UP,DOWN
AWB
0
0
3200K
PRESET A
OFF
DATA UP
Red is increased.
10
0
DATA DOWN
DATA UP
Blue is increased.
10
0
DATA DOWN
White balance mode setting AWB, ATW, MANUAL
R PAINT adjustment -10 to 10
B PAINT adjustment -10 to 10
Color temperature setting 3200K, 5600K
AWB area selection
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E,
USER
AWB area display selection
10
10
22