Installation; Install Latest Cisco Unified Communications Manager Release; Install Cisco Unified Communications Manager Device Packs - Cisco 8941 Release Notes

Cisco Unified IP Phone 8941 8945 Release Notes for Firmware Release 9.3(2)SR1

Installation

Install latest Cisco Unified Communications Manager release

Before using the Cisco Unified IP Phone with Cisco Unified Communications Manager, your Cisco Unified
Communications Manager servers must be running a version of the server software that supports the phones.
All Cisco Unified Communications Manager servers in the cluster must support the phones. For information
about the minimum Cisco Unified Communications Manager software version that the phone requires, see
the introductory sections of these release notes.
For more information on Cisco Unified Communications Manager installations and upgrades, see the documents
for your Cisco Unified Communications Manager version at the following location:
en/US/products/sw/voicesw/ps556/prod_installation_guides_list.html
To download and install the Cisco Unified Communications Manager version, perform these steps.
Procedure
Step 1 Go to the following URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&catid=278875240
Step 2 Choose your Cisco Unified Communications Manager version.
Step 3 Choose the appropriate software type.
Step 4
Hover over the desired file. When the popup window displays, click the Readme link to open the readme file.
Step 5 Choose Download or Add to cart for the desired file.
Step 6 Use the instructions in the readme file to install the updated file on the Cisco Unified Communications Manager.

Install Cisco Unified Communications Manager Device Packs

Device packs are required to enable IP phones in the Cisco Unified Communications Manager database. For
information about compatible device packs, see
compat/devpack_comp_mtx.html.
For Cisco Unified CallManager 4.2 and earlier, these device packs are required. For Cisco Unified CallManager
4.3 and Cisco Unified Communications Manager 6.0 and later, you must run the device pack and reboot the
Cisco Unified Communications Manager server.
To install the device packs, follow these steps.
Procedure
Step 1 Go to the following URL: .
http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&flowid=21301
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/
Cisco Unified IP Phone 8941 and 8945 Release Notes for Firmware Release 9.3(2)SR1
Installation
http://www.cisco.com/
3