Rack Mount Instructions; Removing Power To The Receiver - Bosch Conettix D6600 Installation And Operation Manual

26 en | Installation
Notice!
i
Ensure that a switch does not control the outlet.
Transformer.
options.
reports to each line connected to the receiver.
8.2

Rack Mount Instructions

Refer to the specific installation guide supplied with your product.
8.3

Removing Power to the Receiver

1.
2.
3.
Warning!
Do not try to restart the D6600/D6100IPv6 with a fully discharged battery. Reconnect after
!
you apply power. To prevent deep battery discharge, use a D135A Low Battery Cutoff Module.
Refer to the D135A Installation Guide (P/N: 74-06499-000) for more information.
Notice!
i
If programmable Output 1 or 2 is activated by automation failure, you cannot clear Output 1
or 2 by pressing the Acknowledge key.
2012.11 | 08 | 4998122704
Turn the D6600 power switch on. The D6100IPv6 starts as soon as you plug in the AC
Set the calendar and clock to the correct date and time and program the necessary
Ensure that the communication formats are correct by having communicators send test
Remove the battery power connection.
Turn off the AC power on the D6600 or unplug the D6100IPv6 AC transformer.
Unplug the AC cord from the outlet.
Installation and Operation Guide
Conettix Communications Receiver/
Gateway
Bosch Security Systems, Inc.