Troubleshooting - Samsung SPF-87H User Manual

* Appendix
If the product doesn't operate properly, first check the following items.
If the problem still persists, contact or visit the nearest Samsung service center.
The power won't switch on.
Spots which look like light leaking can be seen on the
edges of the clock screen.
The time setting is wrong.
It takes a long time for images to be displayed after the
power has been turned on.
It takes a long time to move from one image to the
next.
I can't copy more files even when there is excess
capacity to use in the internal memory.
I've connected an external memory device (USB memory
device or SD memory card) but it doesn't work.
Vertical pictures are displayed horizontally.
JPEG files are not displayed.
Some pictures are not displayed as a Slideshow.
Ensure that the power cable is correctly connected.
Black LCD panel screens by nature can have this effect, which is not a
defect.
The current time setting can be erased if the power adaptor is
disconnected for a prolonged period of time.
Keep the power adaptor connected.
It is recommended to reduce the picture resolution.
You may be unable to copy files if the FAT section of the internal
memory is damaged.
Try again after formatting the internal memory.
SPF-87H can be used by connecting the power adapter instead of
the USB cable.
Ensure that the external memory device has been connected properly
or try formatting it.
Ensure that JPEG files are saved in the external memory device.
Abnormal picture files (0 Kbyte, broken JPEG) will not be displayed
on the screen.
The connected external memory device is not supported. Try another
storage device.
Ensure that the <
< >-< >.
Progressively saved JPEG files or JPEG files saved as CMYK color
coordinates will not be displayed.
Images edited by a JPEG image editor (Photoshop, Paintshop, etc.)
may not be displayed normally. Edit the image on a PC, convert back
to JPEG format, save, and try again.
This product can accommodate a maximum of 4,000 pictures. Any
excess pictures will not be recognized and will not be displayed as a
Slideshow.
> option is set correctly in