Dial Cycles - GE EDW1500 Series Owner's Manual

About the dial cycles.
Rinse Only
HOT START
OPTION
For rinsing partial loads that will be washed later. Do not use detergent.
START
START DELAY
(HRS)
SHORT
OFF
WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Plate Warmer
HOT START
OPTION
For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.
START
START DELAY
(HRS)
SHORT
OFF
WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Hot Start
HOT START
OPTION
Preheats wash water to the correct temperature.
START
START DELAY
(HRS)
SHORT
OFF
WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Short Wash
HOT START
OPTION
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
START
START DELAY
(HRS)
SHORT
OFF
WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
Start Delay
HOT START
OPTION
The START DELAY will allow you to delay the start time of any cycle not on the Dial automatically
START
START DELAY
(HRS)
for up to either 5 or 6 hours (depending on model).
SHORT
OFF
WASH
PLATE WARMER
(HEATED DRY ON)
RINSE ONLY
(HEATED DRY OFF)
6
Make sure HEATED DRY is not selected.
1
Be sure the door is unlatched.
2
1 Load clean dishware to be warmed.
Select HEATED DRY ON.
2
3 Be sure the door is unlatched.
Select the HOT START cycle and any
1
other option.
2 Be sure the door is unlatched.
Select the NORMAL WASH cycle and
1
any options.
2 Be sure the door is unlatched.
1 Be sure the door is unlatched.
Select the wash cycle and option you want.
2
Slowly turn the Dial to RINSE ONLY.
3
Latch the door to start the cycle.
4
Slowly turn the Dial to PLATE WARMER.
4
Latch the door to start the cycle.
5
Slowly turn the Dial to HOT START.
3
4 Latch the door to start the cycle.
Slowly turn the Dial to SHORT WASH.
3
Latch the door to start the cycle.
4
Slowly turn the Dial to the desired time.
3
The CYCLE ON light will come on.
Latch the door to start the cycle.
4