Technical Data - Husqvarna Rider 115C Operator's Manual

Dimensions
Length with cutting unit, cm/inch
Width with cutting unit, cm/inch
Height, cm/in
Operating weight with cutting deck, kg/lb
Wheel base, cm/in
Tyre dimensions
Air pressure, rear - front, kPa / bar / PSI
Max. gradient
Engine
Brand / Model
Nominal engine output, kW (see note 1)
3
Displacement, cm /cu.in
Max.motor speed, r/min
Fuel, minimum octane grade lead-free
Fuel tank capacity, litre
Oil, class SJ-CF
Oil tank capacity, litre/USqt
Starting
Electrical system
Type
Battery capacity, Ah
Spark plug
Electrode gap, mm/inch
Main fuse
Noise emissions and cutting width (see note 2)
Sound power level, measured dB (A)
Sound power level, guaranteed dB(A)
Cutting width, cm/inch
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
Vibration level in the seat, m/s
Transmission
Brand
Lubricant
Forward speed, km/h.
Reverse speed, km/h
Cutting unit
Type
Cutting heights, 5 positions, mm/inch
Cutter (see note 5)
Blade length, mm/inch
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine
model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the
engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
Note 3: Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical dispersion (standard
deviation) of 1.2 dB(A).
Note 4: Vibration level according to ISO 5395. Reported data for vibration level has a typical statistical dispersion (standard deviation)
2
of 0.2 m/s (steering wheel) and 0.8 m/s
Note 5: Always use genuine parts.

TECHNICAL DATA

Rider 115C
229 / 90,2
99 / 39
108 / 42.7
215/474
84,5 / 33,3
165/60-8
60 / 06 / 8.7
10°
Briggs & Stratton / 4145
9,5
500 / 30.5
3000 ± 100
85
7
SAE 10W/30
1,4/1,5
Electric starter
12 V, negative earthed
21
Champion XC92YC
0,75/0,030
Flat pin, 15 A.
99
99
95 / 37,4
85
2
1,6
2
0,7
Tuff Torq T36P
0-10
0-8
Combi-unit
25-75 / 1-3
Combi-Cutter C95 - P/N 580 39 74-01 Combi-Cutter C95 - P/N 580 39 74-01
430/17
2
(seat).
Rider 120C
229 / 90,2
126 / 49,6
108 / 42.7
217/478.5
84,5 / 33,3
165/60-8
60 / 06 / 8.7
10°
Briggs & Stratton / 4195
10,2
500 / 30.5
2900 ± 100
85
7
SAE 10W/30
1,4/1,5
Electric starter
12 V, negative earthed
21
Champion XC92YC
0,75/0,030
Flat pin, 15 A.
98
98
95 / 37,4
84
1.6
0,7
Tuff Torq T36P
0-10
0-8
Combi-unit
25-75 / 1-3
430/17
) in conformity with EC directive 2000/14/EC.
WA
– 27
English