GE 5100 Series Owner's Manual page 7

Zoneline heat pump
Table of Contents

Advertisement

Fan Switch
Fan switch
9
ON
ON
OFF
OFF
Auxiliary Controls
Down/Off—Continuous Fan
Up/On—Cycle Fan
Freeze Sentinel
The fan switch 9 is located behind
the room cabinet.
This switch is set at continuous fan
(down) at the factory to provide
continuous fan operation in cool
or heat modes. Leaving the switch
in the continuous fan setting allows
continuous circulation of room air
and will result in a more balanced
temperature throughout the room.
The Freeze Sentinel feature
automatically turns on the
resistance heater and fan if the
room temperature (sensed at
the unit) drops to approximately
40 F. It will turn the heater off
when the temperature reaches
about 45 F.
If you want the fan to cycle on
and off with the compressor or
with the heater, move the switch
to cycle fan (up).
The Freeze Sentinel helps prevent
plumbing damage in the room due
to sub-freezing temperatures.
The Freeze Sentinel is active as long
as power to the unit is on.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zoneline 5100 series

Table of Contents