Download  Print this page

Attaching And Removing The Dust Cover; Attaching The Dust Cover - Acer AIT-1 SDX-400V User Manual

Ait drive
Hide thumbs

Advertisement

Attaching and Removing the Dust
Cover

Attaching the Dust Cover

1
Align the dust cover's hinge clips (one on each side) with the
pins of the drive bezel.
The dust cover should be positioned so that the magnets
cover's back face the drive bezel.
*
This magnet does not affect the tape of the cartridge.
Holding the dust cover at an angle as shown in the figure below, set
the hinge clips on top of the bezel pins, positioning them so that
they bracket the pins.
16
*
on the

Advertisement

Table of Contents
loading

  Related Manuals for Acer AIT-1 SDX-400V