Adjusting Picture Settings; Turning The Black Level On/Off - Yamaha DVD-S661 Owner's Manual

Adjusting picture settings

This unit comes with three predefined sets of
picture color settings and one personal setting
that you can define yourself.
1 In "VIDEO SETUP PAGE", press 5/a to
highlight [PICTURE SETTING], and then
press 3.
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and
color (saturation).
2
Press 5/a to select a setting, and then
press ENTER.
3
If you select [PERSONAL] in step 1,
proceed to steps 4-7.
➜ The "PERSONAL PICTURE SETUP"
menu appears.
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
COLOR
4 Press 5/a to select one of the following
options.
BRIGHTNESS
Increase or decrease the value to brighten or
dim the picture. Zero (0) is the average
brightness setting value.
CONTRAST
Increase or decrease the value to sharpen or
dull the picture. Zero (0) is the average contrast
setting value.
TINT
Increase or decrease the value to darken or
lighten the picture. Zero (0) is the average tint
setting value.
COLOR
Increase or decrease the value to enhance or
fade the picture. Zero (0) is the average color
setting value.
5 Press 2 / 3 to adjust the setting that best
suits your personal preference.
6
Repeat steps 4-5 to adjust other color
features.
7
Press ENTER.
Note
All picture settings are not available for HDMI
output.

Turning the black level on/off

If [TV TYPE] is set to [NTSC] (see page 13),
set the black level to on to improve the color
0 contrast during playback. The black level
0
setting has no effect if [TV TYPE] is set to
0
[PAL].
0
1 In "VIDEO SETUP PAGE", press 5/a
to highlight [BLACK LEVEL], and then
press 3.
ON
Select this to enhance the black level.
OFF
Select this for the standard black level setting.
2 Press 5/a to select a setting, and then
press ENTER.
Setup Menu
29
En