Table of Contents
Advertisement
Enter prefix number (e.g. access code of the subscriber you call
most frequently).
Press “INT/OK” key to confirm.
Activating/Deactivating Automatic Call
Answering
The automatic call answering function enables the incoming call to
be taken immediately when the handset is removed from the base
station.
Press
key as often as necessary until the HANDSET menu
appears and press “INT/OK” key.
Press
or
key to select the submenu and press
“INT/OK” key.
Use
or
key to switch automatic call answering on or
off and press “INT/OK” key to confirm the input.
Press “INT/OK” key to confirm.
Activating/Deactivating Call Timer
It is possible to display the call duration of a call on the handset. The
timer starts when the conversation begins.
Press
key as often as necessary until the HANDSET menu
appears and press “INT/OK” key.
Press
or
key to select the submenu and press
“INT/OK” key.
Use
or
key to switch the call timer on or off and press
“INT/OK” key to confirm.
Default Settings
The handsets can be reset to the default settings. In doing so, all the
settings which you have changed are returned to their default values.
The phone book entries are retained.
Press
key until the HANDSET menu appears and press
“INT/OK” key.
Press
or
key to select the submenu and press
“INT/OK” key to confirm.
Note: The display will switch back to standby mode.
Key assignment Overview
1
SPACE, 1
7
P, Q, R, S, 7
2
A, B, C, 2
8
T, U, V, 8
3
D, E, F, 3
9
W, X, Y, Z, 9
4
G, H, I, 4
0
+, -, 0
5
J, K, L, 5
*
[, ], U
6
M, N, O, 6
#
?, :, .
Registering Additional Handsets
Further handset of the same model can be registered on one base
station.
Press
key until the HANDSET menu appears and press
“INT/OK” key.
Press
or
key to select the submenu “REGISTER” and
press “INT/OK” key.
Handset display shows “SEARCHING”.
Press and hold “page” key on the base station more than 4
seconds until acknowledgement signal is heard.
Enter the PIN (default setting = 0000) and press “INT/OK” key.
Note: After the connection has been established, the name
and number of the handset (the next available handset
number should be 2) appear in the display.
The base will be ready for registration for 10 minutes when the page
key is pressed and hold for more than 4 seconds. After selecting
“REGISTER”, the handset starts searching for a base station which is
available for registration. The “Aerial” icon starts flashing.
If a base is found, user will be asked to enter the PIN for that base.
If the input PIN is correct, the registration procedure will be
completed with a confirm tone
Page 11
Advertisement
Table of Contents
