Supported Products; Supported Configurations - HP 572018-B21 Specification

For c-class bladesystem
Table of Contents

Advertisement

QuickSpecs

Supported Products

Compatibility
HP BladeSystem ProLiant
and Integrity Servers
HP ProLiant and Integrity
BL c-Class
Server Blade Enclosures

Supported Configurations

1. Upper Fan System
2. Interconnect Bays 1 /2
3. Interconnect Bays 3 / 4
4. Interconnect Bays 5 / 6
Compatible with HP ProLiant c-class Blade Servers (up to Generation 7) and HP Integrity c-class Blade
Servers supporting the QLogic QMH2462 4Gb FC HBA and Emulex LPe1105-HP 4Gb HBA.
Compatible with HP ProLiant c-class Blade Servers (G6 & G7) supporting Brocade 804 8Gb FC HBA,
QMH2562 8Gb FC HBA, and LPe1205 8Gb HBA.
Compatible with current release of HP ProLiant c-Class Generation 8 Blade Servers supporting the QLogic
QMH2572 8Gb FC HBA and Emulex LPe1205A 8Gb FC HBA.
For the latest additional information on required firmware versions and to download firmware upgrades,
see the HP website:
http://www.hp.com/go/bladesystemupdates
The HP BladeSystem c3000 and c7000 Enclosures have been designed up front with the Virtual Connect
Architecture in mind incorporating the HP Onboard Administrator, ILO Management, and HP Management
tools inside the Virtual Connect framework.
NOTE: HP Integrity BL8x0c i2 Server Blades require OA version 3.0 or later.
For the latest additional information on required firmware versions and to download firmware upgrades,
see the HP website:
http://www.hp.com/go/bladesystemupdates
HP BladeSystem c7000 Enclosure - Rear View
DA - 13421 Worldwide — Version 9 — August 30, 2013
HP Virtual Connect 8Gb 20-Port Fibre Channel Module for
5.
Interconnect Bays 7 / 8
6.
On Board Administrator
7.
Lower Fan System
8.
Rear Redundant Power Complex
c-Class BladeSystem
Page 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Virtual connect 8gb 20-port fibre channel module

Table of Contents