Honeywell Spyder Specification Data page 7

8-9/32
(211)
4-1/8
(105)
1 1 1 1 1 1 1 2 2 2 2 2
3 4 5 6 7 8 9 0 1 2 3 4
6-1/4
(159)
5-7/8
(149)
1 2 3 4 5 6
7 8 9 10 11 12
3/16 (4.5) PANEL
MOUNTING HOLE (4X)
NOTE: CONTROLLER CAN BE MOUNTED IN ANY ORIENTATION.
Fig. 2. Panel mounting—controller and actuator
dimensions in inches (mm) for PVB0000AS and
PVB4022AS only (PVB4022AS shown).
5-3/4
5-3/64
(146)
(128)
5-29/64
(139)
NOTE: CONTROLLER CAN BE MOUNTED IN ANY ORIENTATION.
Fig. 4. Panel Mounting Models PVB6438NS, PUB6438S, and PUB6438SR, Dimensions in inches (mm)
1-15/16
(49)
27/32
(21)
6-9/32
(159)
DEPTH IS
2-1/4 (57)
M33229A
PANEL MOUNTING HOLE
(4X) 29/64 IN. (12)
PVB6438NS
2 2 2 2 2 2 2 2 3 2 3 3 3 3 3 3 3 3 4 3
1 2 3 4 5 6 7 8 0 9 1 2 3 4 5 6 7 8 0 9
1 1 1 1 1 1 1 1 2 1 1
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 0 9
6-29/64 (164)
6-27/32 (174)
(PVB6438NS and PUB6438S shown).
SPYDER® BACNET® PROGRAMMABLE CONTROLLERS
10-5/16 (262)
8-5/16 (211)
2 2 2 2 2 2 2 2 3 2
5-3/4
1 2 3 4 5 6 7 8 0
(146)
5-3/64
(128)
1 2 3 4 5 6 7 8
PANEL MOUNTING HOLE
NOTE: CONTROLLER CAN BE MOUNTED IN ANY ORIENTATION.
Fig. 3. Panel Mounting Model PVB6436AS, Dimensions in
PUBXXXXS and PUBXXXXNS Mounting
(Controllers with no actuators)
The controller mounts to either a panel or DIN rail (standard
EN50022; 7.5mmm x 35mm).
• For panel mounting, use four No. 6 or No. 8 machine or
sheet metal screws inserted through the corners of the
base plate.
• For DIN rail mounting, refer to the Installation Instructions,
form 62-0310.
PUB6438S
2 2 2 2 2 2 2 2 3 2
1 2 3 4 5 6 7 8 0
5-3/64
(128)
5-29/64
(139)
1 2 3 4 5 6 7 8
6-29/64 (164)
6-27/32 (174)
DEPTH IS
2-1/4 (57)
7
1-55/64
6-29/64 (164)
(47)
3 3 3 3 3 3 3 3 4 3
9 1 2 3 4 5 6 7 8 0 9
1 1 1 1 1 1 1 1
9 0 1 2 3 4 5 6 7
DEPTH IS
(4X) 29/64 IN. (12) 2-1/4 (57)
inches (mm).
3 3 3 3 3 3 3 3 4 3
9 1 2 3 4 5 6 7 8 0 9
1 1 1 1 1 1 1 1 2 1 1
9 0 1 2 3 4 5 6 7 8 0 9
M29260
7/16
(11)
6-17/64
(159)
M29259
63-1328—05