3Com 4500G Family Configuration Manual page 597

This example assumes that the RADIUS server runs iMC PLAT 3.20-R2602 or iMC UAM 3.60-E6102.
# Add an access device.
Log into the iMC management platform, select the Service tab, and select Access Service > Access
Device from the navigation tree to enter the Access Device page. Then, click Add to enter the Add
Access Device window and perform the following configurations:
Set both the shared keys for authentication and accounting packets to expert
Specify the ports for authentication and accounting as 1812 and 1813 respectively
Select Device Management Service as the service type
Select 3Com as the access device type
Select the access device from the device list or manually add the device with the IP address of
10.1.1.2
Click OK to finish the operation
Figure 1-10 Add an access device
# Add a user for device management
Log into the iMC management platform, select the User tab, and select Access User View > Device
Mgmt User from the navigation tree to enter the Device Management User page. Then, click Add to
enter the Add Device Management User window and perform the following configurations:
Add a user named hello@bbb and specify the password
Select SSH as the service type
Specify the IP address range of the hosts to be managed as 192.168.1.0 to 192.168.1.255, and
click Add to finish the operation
1-40