Configured Ipv6 Multicast Group Policy Fails To Take Effect - 3Com 4500G Family Configuration Manual

Configured IPv6 Multicast Group Policy Fails to Take Effect

Symptom
Although an IPv6 multicast group policy has been configured to allow hosts to join specific IPv6
multicast groups, the hosts can still receive IPv6 multicast data addressed to other groups.
Analysis
The IPv6 ACL rule is incorrectly configured.
The IPv6 multicast group policy is not correctly applied.
Solution
1) Use the display acl ipv6 command to check the configured IPv6 ACL rule. Make sure that the IPv6
ACL rule conforms to the IPv6 multicast group policy to be implemented.
2) Use the display this command in MLD Snooping view or the corresponding port view to check
whether the correct IPv6 multicast group policy has been applied. If not, use the group-policy or
mld-snooping group-policy command to apply the correct IPv6 multicast group policy.
1-27