3Com 4500G Family Configuration Manual page 1139

24/48 port
Hide thumbs Also See for 4500G Family:
Table of Contents

Advertisement

[SwitchA] track 1 nqa entry admin test reaction 1
5)
Verify the configuration.
# On Switch A, display information about all the Track entries.
[SwitchA] display track all
Track ID: 1
Status: Positive
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display brief information about active routes in the routing table on Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 5
Destination/Mask
Proto
10.1.1.0/24
Static 60
10.2.1.0/24
Direct 0
10.2.1.2/32
Direct 0
127.0.0.0/8
Direct 0
127.0.0.1/32
Direct 0
The above information shows that the static route with the next hop 10.2.1.1 is active, and the status of
the track entry is positive. The static route configuration works.
# Remove the IP address of VLAN-interface 3 on Switch B.
<SwitchB> system-view
[SwitchB] interface vlan-interface 3
[SwitchB-Vlan-interface3] undo ip address
# On Switch A, display information about all the Track entries.
[SwitchA] display track all
Track ID: 1
Status: Negative
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 1
# Display brief information about active routes in the routing table on Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 4
Destination/Mask
Proto
10.2.1.0/24
Direct 0
10.2.1.2/32
Direct 0
Routes : 5
Pre
Cost
NextHop
0
10.2.1.1
0
10.2.1.2
0
127.0.0.1
0
127.0.0.1
0
127.0.0.1
Routes : 4
Pre
Cost
NextHop
0
10.2.1.2
0
127.0.0.1
1-39
Interface
Vlan3
Vlan3
InLoop0
InLoop0
InLoop0
Interface
Vlan3
InLoop0

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents