HP XP P9500 Owner's Manual page 84

Table 31 P9500 environmental specifications (continued)
Item
Earthquake
resistance (m/s2)
Shock
Altitude
Notes:
1. Recommended temperature range is 21 to 24°C
2. On shipping/storage condition, the product should be packed with factory packing
3. The above specifications of vibration are applied to all three axes
4. See ASTM D999-01 The Methods for Vibration Testing of Shipping Containers.
5. See ASTM D5277-92 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester.
6. See ASTM D6055-96 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and
Crates.
7. Time is 5 seconds or less in case of the testing with device resonance point (6 to 7Hz).
8. When flash modules are installed in the system.
84 Specifications
Operating Not Operating
70 to 99 Hz: 0.05 mm
99 to 300 Hz: 9.8 m/s
7
Up to 2.5 -
- 78.4 m/s
-60 m to 3,000 m
In Storage
At the resonant frequency with
the highest displacement found
1
between 3 to 100 Hz
Random Vibration:
0.147 m2/s3
30 min, 5 to 100 Hz
-
1
, 15 ms Horizontal:
Incline Impact 1.22 m/s
5
Vertical:
Rotational Edge 0.15 m
6
-
3
4