Table of Contents
Advertisement
menu #2 - advanced features
Feature
One Chirp
Number
Setting
2-1
Siren
2-2
30-second siren duration
2-3
False alarm prevention Circuitry ON
2-4
Progressive door trigger
2-5
Override switch input: 1 pulse
2-6
Open Zone Bypass Notice ON
2-7
Ignition-controlled domelight ON
2-8
Single unlock pulse
2-9
Channel 3: Validity
*Second unlock is only available if Feature 2-8 is programmed to single pulse.
feature descriptions
The features of the system are described below. Features that have additional settings that can be select-
ed only when programming with the Pro Security Programmer are indicated by the following
icon:
menu #1 - basic features
1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the
remote is used. When set to passive, the system will arm automatically 30 seconds after the last door
is closed. To alert the consumer of passive arming, the siren will chirp 20 seconds after the door is
closed. This provides the consumer with an audible indication prior to the system actually arming. At
the 30 second mark, the system will arm but the siren will not chirp.
1-2 Chirps ON/OFF: This feature controls the chirps that confirm the arming and disarming of the system.
1-3 IGNITION CONTROLLED DOOR LOCKS ON/OFF: When turned on, the doors will lock
three seconds after the ignition is turned on (with doors closed) and unlock when the ignition is
turned off. The Pro Security Programmer will display separate steps for ignition lock and ignition
unlock. They can be programmed on or off independently.
16
Two-Chirp
Setting
Horn honk
60-second siren duration
False alarm prevention Circuitry OFF
Instant door trigger
Override switch input: 2-5 pulses
Open Zone Bypass Notice OFF
Ignition-controlled domelight OFF
Double unlock pulse
Channel 3: latched/latched, reset
with ignition/30-second timed/
second unlock output*
Hide quick links:
Advertisement
Table of Contents
