HP Z220 Specification page 51

QuickSpecs
Technical Specifications - Optical and Removable Storage
HP 22-in-1 Media Card
Reader
Description
Mounting Orientation
Interface Type
Dimensions (WxHxD)
Disc Formats
DA - 14286 North America — Version 20 — November 21, 2013
The Media Card Reader device uses the same physical form factor and
mounting as a Floppy Disk Drive. The device connects to a 2x5 two-channel
USB header on the motherboard of the system. There is no USB controller card
provided. Please see the Disc Formats section below for a list of flash memory
card formats that are supported.
The Media Card Reader can be mounted in a dedicated Floppy Drive bay (if the
chassis provides one) or in an appropriate Optical Bay adapter. It will operate
in any orientation.
USB 2.0 (one channel dedicated to the separate USB port; one channel
dedicated to the flash memory card slots)
124.5 x 101.6 x 25.4 mm (4.9 x 4.0 x 1.0 in)
Picture
Micro SD
Micro SDHC
SD
SDHC
SDXC
Mini SD
Mini SDHC
MultiMediaCard
Reduced Size MultiMediaCard (RS MultiMediaCard)
MultiMedia Card 4.2 (MultiMediaCard Plus, including MultiMediaCard Plus HC)
Reduced Size MultiMedia Card 4.2 (MultiMediaCard Mobile, including
MultiMediaCard Mobile HC)
CompactFlash Card Type I
CompactFlash Card Type II
MicroDrive
Memory Stick (MS)
MagicGate Memory Stick (MG)
MagicGate Memory Stick Duo
Memory Stick Select
Memory Stick Duo (MS Duo)
Memory Stick PRO (MS PRO)
Memory Stick PRO Duo (MS PRO Duo)
Memory Stick PRO-HG Duo
Two additional formats are usable with adapters (not supplied):
MultiMediaCard Micro
Memory Stick Micro (M2)
HP Z220 CMT Workstation
Page 51