Advertisement
QuickSpecs
Technical Specifications
HP 3TB G2 FH/HL PCIe
ioDrive2 IO Accelerator
for ProLiant Servers
721458-B21
HP 2410GB Multi Level
Cell G2 PCIe Solid State
Drive IO Accelerator
673648-B21
Usable Capacity
Technology
Bandwidth (1MB)
Access Latency
IOPS
Form factor
Bus Interface
Power (Nominal)
Operating Temperature
Supported Driver Version 3.2.3 and higher
Usable Capacity
Technology
Bandwidth (1MB)
Access Latency
IOPS
Form factor
Bus Interface
Power (Nominal)
Operating Temperature
Supported Driver Version 3.x and higher
Auxillary Power
(for ioDrive2 Duo only)
DA - 13587 Worldwide — Version 25 — November 15, 2013
HP PCIe IO Accelerators for ProLiant Servers
3000GB
NAND Flash, MLC
1.3GB/s Writes, 1.5GB/s Reads
17 microseconds for Writes, 68 microseconds for Reads
Read 445,000 IOPS (sequential 512B), Write 535,000 IOPS (sequential 512B)
Read 143,000 IOPS (random 512B), Write 535,000 IOPS (random 512B)
Full Height/Half length-Low profile PCI Express x 4 slot (spec 2.0)
PCI Express x 4
PCI Express x 4 (power spec 2.0)
0-55°C (Operational)/-40-70°C (non-operational)
2410GB
NAND Flash, MLC
2.5GB/s Writes, 3.0GB/s Reads
17 microseconds for Writes, 68 microseconds for Reads
Read 892,000 IOPS (sequential 512B), Write 935,000 IOPS (sequential 512B)
Read 285,000 IOPS (random 512B), Write 725,000 IOPS (random 512B)
Full Height/Half length PCI Express x 8 slot (spec 2.0)
PCI Express 2.0 x 8
PCI Express 2.0 x 8
0-55°C (Operational)/-40-70°C (non-operational)
NOTE: This SKU may require auxiliary power to achieve maximum
performance. Included in the box is a power cable kit that will plug into the
Duo and into a GPU power cable kit for the server (which is not included with
the Duo). Please refer to the Quickspec of the applicable server to determine
which GPU power cable kit from HP is required.
Page 9
Advertisement
