Memory; Memory Configuration - NEC Express5800/R120d-1M Configuration Manual

CONFIGURATION GUIDE

3 Memory

3.1

Memory Configuration

Refer to the section in accordance with your memory configuration:

Independent Channel Configuration: Refer to

Memory Sparing Configuration: Refer to

Memory Mirroring / Memory Lockstep Configuration: Refer to
3.1.1 Independent Channel Configuration
Available slots: 12 per processor
Category
Unbuffered DIMM
(UDIMM)
Registered DIMM
(RDIMM)
Load Reduced DIMM
(LRDIMM)
NOTE:

Minimum one memory kit per processor must be installed.

It is recommended to install memory kits in multiples of two (four identical DIMMs) for quad-channel
symmetric memory configurations to increase memory transfer speed.

When two processors are installed, balance the DIMMs across the two processors.

Mix configurations of UDIMM/RDIMM/LRDIMM are not supported.
NEC Corporation
–
NEC Express5800R120d-1M
Product Name / Description
8GB DDR3-1333 UNB Memory Kit
2x 4GB Unbuffered ECC DIMM, DDR3L-1333(PC3L-10600)
NOTE:
- Up to four sets (eight slots) per processor can be installed
- This DIMM doesn't support x4 SDDC.
4GB DDR3-1600 REG Memory Kit
2x 2GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
NOTE:
- This DIMM doesn't support x4 SDDC.
8GB DDR3-1600 REG Memory Kit
2x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
16GB DDR3-1600 REG Memory Kit
2x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
32GB DDR3-1600 REG Memory Kit
2x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
64GB DDR3-1333 LR Memory Kit
2x 32GB Load Reduced ECC DIMM, DDR3L-1333(PC3L-10600)
Revision 7.0 – July 17, 2013
3.1.1
3.1.2
3.1.3
Part Number
N8102-435F
N8102-468F
N8102-469F
N8102-470F
N8102-471F
N8102-440F
11