Power Lumbar; Heated Seats - GMC Canyon Owner's Manual

Power Lumbar

Press and hold the front of the control until you
have the desired lumbar support. To decrease
lumbar support, press and hold the rear of
the control.
If your vehicle has this
feature, the control is
located on the outboard
side of the seat(s).

Heated Seats

This feature will heat the cushion and back of
the seats.
Press the top of the switch to turn the heat to
the high setting. Press the bottom of the switch
to turn the heat to the low setting. Put the switch
in the center position to turn the heat off.
The ignition must be on for the heated seat
feature to work. The seat will heat to the last
setting if the ignition has been turned off and then
turned back on.
The passenger's safety belt must be fastened for the
heated seat feature to work on the passenger's seat.
If your vehicle has this
feature, the controls are
located on the outboard
side of the front seats.
11